Omron FH Series User Manual page 380

8 Setting Windows
Item
Ident 0
Ident 1
Scene variable
System variable
Precautions for Correct Use
If you change the measurement flow after you create a custom dialog box, change the target
unit number to match the edited measurement flow.
Combo Box Setting Region
Item
Data Type
Target unit No.
Unit label
Target data No.
Data reference but-
ton
Data ident
8 - 80
Setting value
[Factory default]
- These are available when System data is selected in the Data
Type.
Specify the system data to be the target for the radio button
setting using the identifier information 0 and identifier informa-
tion 1. Refer to the Vision System FH Series Macro Customize
Functions Programming Manual (Cat. No. Z367) - system data
list.
- This is available when Scene variable is selected in the Data
Type.
Specify the scene variable to be the target for the radio button
setting using the scene variable name.
- This is available when System variable is selected in the Data
Type.
Specify the system variable to be the target for the check box
setting using the system variable name.
Setting value
[Factory default]
• Sets the unit specification method for targets for which to carry
[Unit data (No.)]
•
out combo box settings.
Unit data (ident)
• The setting details vary depending on the specification meth-
System data
• od.
Scene variable
•
System variable
0 to No. of units in Use the unit number to specify the unit to be the target for the
the display target combo box setting.
scene - 1 [0] The units that are registered for the scene that is the target of
the normal dialog box will appear in the combo box. Select the
processing unit to set.
•
This is available when Unit data (No.) or Unit data (ident) is
[Unchecked]
•
selected in the Data Type.
Checked
If using the unit label to specify the unit to be the target for the
combo box setting, select this and set the unit label.
0 to 9999999 [0] Specify the data to be the target for the combo box setting us-
ing the data number.
Enter the data number for the unit that is specified by the
Target unit No..
- You can select the data number directly to enter it, or you can
enter it with the Data reference button. Click the Data
reference button to select the target data in the Data
reference dialog box.
- Sets when Unit data (ident) is selected in the Data Type.
Use the unit data (identifier name) to specify the unit to be the
target for the combo box setting.
Description
Description
FH/FHV Series Vision System User's Manual (Z365-E1)