Omron FH Series User Manual page 374

8 Setting Windows
Refer to Settings in the Item Properties Display Area on page 8 - 74 that is described later in
this section for details on all settings.
8
When you have finished editing, click the OK button to exit the Edit Dialog Box Window.
l Settings in the Item Properties Display Area
• Common Settings Area
Item
Item title
Display position
• Individual Setting Region
Numeric Box Setting Region
Item
Data Type
Target unit No.
8 - 74
Setting value
[Factory default]
This is set to a
To change the title of the dialog box item, click the
character string
and enter the desired characters.
that is not as-
signed to any other
item in the list
when the item is
added.
X: 0 to 1920 [-] These are the coordinates of the upper left corner of the dialog
Y: 0 to 1080 [-] box item. The upper left corner of the dialog box is 0, 0.
The display position is also updated when you drag an item to
a new position in the Design Pane.
Setting value
[Factory default]
•
[Unit data (No.)] Sets the unit specification method for targets for which to carry
• out the numeric setting.
Unit data (ident)
• The setting details vary depending on the specification meth-
System data
od.
•
Scene variable
•
System variable
0 to No. of units in This is available when Unit data (No.) or Unit data (ident) is
the display target selected in the Data Type.
scene - 1 [0] The units that are registered for the scene that is the target of
the normal dialog box will appear in the combo box. Select the
processing unit to set.
Description
Description
FH/FHV Series Vision System User's Manual (Z365-E1)
button