Omron FH Series User Manual page 369

Item
Setting Button
*1. The setting for scene 0 to 1023 is available when the number of maximum scenes has been changed.
Precautions for Correct Use
If you change the measurement flow after you create a custom dialog box, change the target
unit number to match the edited measurement flow.
l Individual Setting Region
Normal Dialog Box Setting Region
Item
Dialog width
Dialog height
Region Setting Dialog Box Setting Region
Item
Setting target figure
No.
Position Setting Dialog Box Setting Region
Item
Position X's data
No.
Position Y's data
No.
Data reference but-
ton
Color Extract Dialog Box Setting Region
Item
Color R's data No.
Color G's data No.
Color B's data No.
FH/FHV Series Vision System User's Manual (Z365-E1)
Setting value
[Factory default]
- Displays the set contents as the custom dialog box.
Adjust the dialog box position. After adjusting, the adjusted con-
tents will be reflected to the dialog box position X, dialog posi-
tion Y, dialog width, and dialog height by clicking the Close on
the right end of the dialog title bar.
Setting value
[Factory default]
100 to 1920 Sets the width of the dialog box.
[1024]
100 to 1080 Sets the height of the dialog box.
[768]
Setting value
[Factory default]
[0] Specifies the figure number for the unit to use for region setting.
The number that you can select depends on the unit that is
specified.
Setting value
[Factory default]
-1 to 999999999 Specifies the data number on the X axis for the unit to use for
[-1] position setting.
-1 to 999999999 Specifies the data number on the Y axis for the unit to use for
[-1] position setting.
- You can select the data number directly to enter it, or you can
enter it with the Data reference button.
Click the Data reference button to select the target data in the
Data reference dialog box.
Setting value
[Factory default]
-1 to 999999999 Specifies the R's data number for the color to specify for the
[-1] unit to use for color extraction.
-1 to 999999999 Specifies the G's data number for the color to specify for the
[-1] unit to use for color extraction.
-1 to 999999999 Specifies the B's data number for the color to specify for the unit
[-1] to use for color extraction.
8 Setting Windows
Description
Description
Description
Description
Description
8
8 - 69