3
Click OK in the confirmation dialog of version upgrade.
4
Determine a version-up tool to launch.
In the file selection dialog, select the version-up tool stored.
In the case where the Remote Operation tool is for 32-bit, select RemoteVerup_X86.exe. For
64-bit, select RemoteVerup_x64.exe.
When the version-up tool was selected, a version-up confirmation dialog appears.
5
Click OK in the dialog.
Sometimes, the following dialog may appear to prompt the FPGA update. In that case, click
OK.
The following dialog appears and then the update starts.
FH/FHV Series Vision System User's Manual (Z365-E1)
3 Basic Operations
3 - 47
3