Omron FH Series User Manual page 194

5 Creating Measurement Scenes
System Variable Tab Screen
A System variable holds data such as parameters and measurement results for a processing item,
moreover, which is also used to reference data and perform calculations between units across differ-
ent scenes and scene groups.
In the System variable tab screen, system variables can be registered, deleted, referenced, and
changed. Assigning system variables is performed by clicking Open the unit setting UI on the short-
cut menu of Set button on the Edit flow tab screen.
For details, refer to 5-5-4 Using Variables on page 5 - 43.
c.Menu Bar
b.Variable button area
d.Variable list
(a) Edit item tab area:
Clicking a tab switches screens among Edit flow, Scene variable, and System variable.
(b) Variable button area:
These are used to adding, copying, or deleting system variables.
The items are the same as the shortcut menu items of System variable in the Menu bar and the
items displayed when the right mouse button is clicked at each variable name on the System vari-
able list.
Icon
5 - 22
a.Edit item tab area
Function
Loads a list of variables from a CSV file. The variables defined
before loading will be deleted.
Open
The selection for a CSV file to be loaded is performed with the
displayed FileExplorer.
Saves a list of variables to a CSV file.
Save The setting for Save Destination and Name is performed with
the displayed FileExplorer.
Adds a variable. The setting for the variable's name and type
Add
to be added is performed with the Add dialog box displayed.
Copies a variable selected on the list, while holding data ex-
Copy cept the name. The setting for the variable name to be copied
is performed with the Copy dialog box displayed.
Delete Deletes a variable selected on the list.
Description
FH/FHV Series Vision System User's Manual (Z365-E1)
e. Remaining
variable
definitions