7-2
Switching the Scene or Scene Group
You can switch the scene to perform a process change. The default display is scene 0 when the power
supply is turned ON. You can create many scenes (scenes 0 to 127). Also, if you use scene groups,
you can set up to 4,096 scenes. You can also send commands from an external device to switch the
scene group or scene.
For details, refer to Vision System FH/FHV Series User's Manual for Communications Settings (Cat.
No. Z342).
7-2-1
Switching the Scene
1
In the Main Window (layout 0), click the Scene switch button in the Toolbox Pane.
The Scene switch dialog box is displayed.
Additional Information
An alternative operation is to select Switch scene from the Function menu.
2
Click ▼ to select the scene to switch to.
To change the scene group, click Switch, and then click ▼ in the displayed dialog box to select
the scene group to switch to.
3
Click OK.
The scene is switched to the specified one.
7-2-2
Switching Scene Groups
Use the following procedure to switch to the scene group in which the scene to be edited is stored.
1
In the Main Window (layout 0), select Scene maintenance from the Function menu.
The Scene maintenance dialog box is displayed.
2
Click the Switch button in the Scene Group Area.
The Scene group switch dialog box is displayed.
FH/FHV Series Vision System User's Manual (Z365-E1)
7 Increasing/Switching Measurement Scenes
7
7 - 3