Omron FH Series User Manual page 126

4 Setting the Controller
Processing item
Filtering
Back Ground Suppression
Brightness Correct Filter
Color Gray Filter
*1. The Subtract only measurement mode is not supported.
*2. Images from odd numbered measurements and from even numbered measurements are logged in sep-
arate folders.
Multi-line Random-trigger Mode
You use the Multi-line Random-trigger Mode when you want to measure more than one line with a sin-
gle Controller. You can measure the inputs from different Cameras on up to eight independent lines.
You can set a scene group data and scene data for each line.
You can switch between lines with the Line button that is located on the Measurement Manager Bar
that is displayed at the bottom right of the window.
4 - 18
Sup-
Processing item
port
OK Calc Axis Move by Multi-
point
OK Detection Point
OK Camera Calibration
OK Data Save
FH/FHV Series Vision System User's Manual (Z365-E1)
Sup-
Processing item
port
OK
OK
OK
OK
Sup-
port