Class Of Service Options For Disa/E&M - NEC SL1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie line
Program
Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09. Assign
tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
20
Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this program. However,
analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are NOT supported by this program.
Input Data
Item No.
01
02
03
04
05
06
07
08
09
2-180
Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
Class of Service Number
Item
First Digit Absorption (Delete First Digit Di-
aled)
For tie lines, enable or disable the ability to absorb
(ignore) the first incoming digit. Use this to make
the tie trunk compatible with 3- and 4-digit tie line
service. This option does not apply to DISA.
Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk
caller ability to dial 9 for Trunk Group Routing or
Automatic Route Selection (ARS/F-Route).
Trunk Group Access
This option enables or disables a DISA or tie trunk
caller ability to access trunk groups for outside
calls (Service Code 804).
Outgoing System Speed Dial
This option enables or disables DISA or tie trunk
caller ability to use the System Speed Dialing.
Operator Calling
This option enables or disables a DISA or tie trunk
caller ability to dial 0 for the telephone system op-
erator.
Internal Paging
This option enables or disables a DISA or tie trunk
caller ability to use the telephone system Internal
Paging.
External Paging
This option enables or disables a DISA or tie trunk
caller ability to use the telephone system External
Paging.
Direct Trunk Access
This option enables or disables a DISA or tie trunk
caller ability to use Direct Trunk Access (Service
Code #0).
Forced Trunk Disconnect <Not for ISDN
T-point>
This option enables or disables a tie trunk caller
ability to use Forced Trunk Disconnect (Service
Code 724). This option is not available to DISA
callers.
01 ~ 15
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
Program 20 : System Option Setup
ISSUE 1.0
Default
COS 01 ~ 15
0
0
0
0
0
0
0
0
0