Advertisement
4- Connect the Power & System Start Up
1
Power on the XN120.
2
The BRI/VOIP card(s) will be
automatically configured.
XN120 2OPBOX Guide
! System Start Up – Retain Customer Configuration
This is the normal operation for powering the XN120 on.
Before you power on the system check that the NORMAL switch is set
to ON. This will ensure that the system memory retains your
configuration.
The NORMAL switch is located to the right of the MOH/Page
connector on the main unit, refer to the Getting Started Guide supplied
with the XN120 for further information.
Refer to the instructions supplied with the option card for configuration
details.
XN120 2OPBOX
7
Advertisement
