Adjusting The Contrast Of The 300 Circuit Board Display (Display Panel) - Kodak X-Omat 460 RA Processor Service Manual

Adjusting the Contrast of the 300 Circuit Board Display (Display Panel)

[1] To darken the display, press and hold the fourth SOFT KEY on the DISPLAY PANEL. At the same time,
press the first SOFT KEY on the DISPLAY PANEL as necessary to obtain the desired contrast.
[2] To lighten the display, press and hold the fourth SOFT KEY on the DISPLAY PANEL. At the same time,
press the second SOFT KEY on the DISPLAY PANEL as necessary to obtain the desired contrast.
Press to
Darken Display
636739
Press to
Lighten Display
Figure 6-8 Adjusting the Brightness of the 300 Board Display
Press and Hold to
Change Contrast
H104_0080BCB
H104_0080BA
6-9