Circuit Breaker - Kodak X-Omat 460 RA Processor Installation Instructions Manual

Leak Check
[1] Using either buckets of water or a hose, fill the DEVELOPER, FIXER, and WASH TANKS to the overflow
level with water.
[2] To provide for conduction of the SOLUTION LEVEL SENSORS—
(a) Add 3 ounces of DEVELOPER to the DEVELOPER REPLENISHMENT TANK.
(b) Add 3 ounces of FIXER to the FIXER REPLENISHMENT TANK.
[3] Move the MAIN CIRCUIT BREAKER, CB1, to the ''I'' position.
[4] Move AUXILIARY CIRCUIT BREAKERS CB2, CB3, and CB4 to the ''I'' position.
42
MAIN

CIRCUIT BREAKER

(CB1)
AUXILIARY CIRCUIT BREAKERS
CB2, CB3, and CB4
Figure 46 Location of Circuit Breakers
H108_0002CCC
H108_0002CA
636738