Removing The Main Drive Motor - Kodak X-Omat 460 RA Processor Service Manual

Removing the Main Drive Motor

For this procedure the processor must be deenergized. See page 1-6. In addition, the TOP
COVER and DRIVE SIDE ACCESS PANEL must be removed from the processor. See pages 1-3
through 1-5 for instructions, if necessary. Also, make sure that the water supply to the processor
is shut off for this procedure.
[1] Remove the SPLASH GUARD from the DRIVE SIDE of the processor.
SPLASH
GUARD
LIGHT
LOCK
3-4
IMPORTANT
Figure 3-2 Removing the Splash Guards
SPLASH
GUARD
SPLASH
GUARD
H108_0124DCB
H108_0124DA
636739