Kodak X-Omat 460 RA Processor Service Manual page 66

[7] Remove the 4 SCREWS securing the RACK SUPPORT/DRYER DRIVE ASSEMBLY to the processor.
[8] Remove the RACK SUPPORT/DRYER DRIVE ASSEMBLY from the processor.
[9] Remove the 4 SCREWS securing the RACK SUPPORT ASSEMBLY to the NON-DRIVE side of the
processor.
[10] Remove the RACK SUPPORT ASSEMBLY from the processor.
[11] Remove the 4 SCREWS supporting the THERMOWELLS.
[12] Move the THERMOWELLS to access and remove the 3 SCREWS securing the BRACKET to the bottom
of the DEVELOPER TANK. See Figure 5-18.
RACK SUPPORT/
DRYER DRIVE
SCREWS
NON-DRIVE
RACK SUPPORT
SCREWS
636739
RACK SUPPORT/
DRYER DRIVE ASSEMBLY
Figure 5-17 Removing the Rack Supports — Top View
RACK SUPPORT
ASSEMBLY
RACK SUPPORT/
DRYER DRIVE
SCREWS
NON-DRIVE
RACK SUPPORT
SCREWS
H108_0149DCA
H108_0149DC
5-19