Kodak X-Omat 460 RA Processor Service Manual page 24

[2] Remove the CHAIN GUARD by loosening the SCREW securing it.
[3] Disconnect the WATER HOSE from the MOTOR MOUNT BRACKET.
[4] Loosen the 2 MOTOR BRACKET MOUNTING BOLTS.
[5] Remove the CHAIN from the SPROCKET.
[6] Remove the SPROCKET from the MOTOR.
[7] Disconnect the MOTOR CONNECTOR J30.
MOTOR
WATER
HOSE
MOTOR
CONNECTOR
J30
MOTOR BRACKET
MOUNTING BOLT (2)
636739
MOTOR MOUNT
BRACKET
Figure 3-3 Removing the Main Drive Motor
GEAR
BOX
MOTOR BRACKET
MOUNTING
SCREW (4)
SPROCKET
CHAIN
H108_0029DCA
H108_0029DA
3-5