Kodak X-Omat 460 RA Processor Service Manual page 68

After draining the TANKS, small amounts of solution will remain in the plumbing system. Be
prepared to wipe up any spills.
While doing Steps 13, 14, and 15, place a MARK on each TUBE as you remove it from the TANK
so that you can identify each TUBE for reassembly.
[13] Remove DRAIN TUBING from the WASH TANK.
[14] Remove all TUBING connected to the sides and bottom of the FIXER TANK.
[15] Remove all TUBING connected to the sides and bottom of the DEVELOPER TANK.
636739
NOTE
NOTE
5-21