Removing The Drive Shaft Assembly - Kodak X-Omat 460 RA Processor Service Manual

Removing the Drive Shaft Assembly

For this procedure the processor must be deenergized, and the TOP COVER and
RECEIVING-END ACCESS PANEL must be removed from the processor. See pages 1-3
through 1-6 for instructions, if necessary.
[1] Remove the SPLASH GUARDS.
SPLASH
GUARD
LIGHT
LOCK
636739
IMPORTANT
Figure 3-5 Removing the Splash Guards
SPLASH
GUARD
SPLASH
GUARD
H108_0124DCB
H108_0124DA
3-7