Kodak X-Omat 460 RA Processor Service Manual page 58

[2] Remove the FILTER CAP.
[3] Remove the DEVELOPER FILTER.
[4] Disconnect the 2 HOSES from the FILTER
CANISTER.
[5] Push the LATCH and lift the FILTER
CANISTER out of the processor.
[6] Install the new FILTER CANISTER.
[7] Connect the 2 HOSES to the FILTER
CANISTER.
[8] Install the new DEVELOPER FILTER and
FILTER CAP.
636739
FILTER
CANISTER
HOSES
Figure 5-8 Removing the Developer
Filter Canister
FILTER
CAP
DEVELOPER
FILTER
LATCH
H108_0116CCA
H108_0116CA
5-11