Energizing The Processor; Deenergizing The Processor - Kodak X-Omat 460 RA Processor Service Manual

Energizing the Processor

[1] Move the wall power switch to the ''ON'' position.
[2] Move the AUXILIARY CIRCUIT BREAKERS, CB2, CB3, and CB4 to the ''I'' position.
[3] Move the MAIN CIRCUIT BREAKER, CB1, to the ''I'' position.

Deenergizing the Processor

[1] Move the MAIN CIRCUIT BREAKER, CB1, to the ''O'' position. See Figure 1-3 for the location of the
CIRCUIT BREAKERS.
[2] Move AUXILIARY CIRCUIT BREAKERS CB2, CB3, and CB4, to the ''O'' position.
[3] Move the wall power switch to the ''OFF'' position.
[4] Attach the MAGNETIC POWER WARNING SIGN, TL-1926, to the wall power switch indicating that the
processor is being serviced.
1-6 636739