[3]
Remove the HEATER BAR ASSEMBLY.
[4]
Install a new HEATER BAR ASSEMBLY.
[5]
Connect the WIRES disconnected in Step 2.
[6]
Install the GRILL, ROLLERS, and AIR TUBES.
The first time the processor is energized, the HEATER will have an odor. This is normal for a new HEATER.
GRILL
636739
NOTE
Figure 4-11 Removing the Dryer Heater
AIR TUBE
HEATER BAR
ASSEMBLY
ROLLERS
H108_0085DCA
H108_0085DA
4-13