Standard Dio, Fi, Fo - ABB ACS380 Firmware Manual

ACS380 FW.book Page 135 Friday, May 4, 2018 4:18 PM
No. Name/Value
10.25 RO1 ON delay
Status of selected
t = 10.25 RO1 ON delay
On
t = 10.26 RO1 OFF delay
Off
0.0 ... 3000.0 s
10.26 RO1 OFF delay
0.0 ... 3000.0 s
10.99 RO/DIO control word
Bit
0
1
2
3
4
5...7
8...15
0000h...FFFFh
10.101 RO1 toggle counter
0...4294967000
11

11 Standard DIO, FI, FO

11.02 DIO delayed status
0000b...0011b
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Defines the activation delay for relay output RO1.
source
RO status
t t
On Off
Activation delay for RO1.
Defines the deactivation delay for relay output RO1. See
parameter 10.25 RO1 ON
Deactivation delay for RO1.
Storage parameter for controlling the relay outputs eg.
through the embedded fieldbus interface. To control the
relay outputs (RO) of the drive, send a control word with
the bit assignments shown below as Modbus I/O data. Set
the target selection parameter of that particular data
(58.101...58.114) to RO/DIO control
selection parameter of the desired output, select the
appropriate bit of this word.
Name Description
RO1 Source bits for relay outputs RO1...RO3 (see parameter 10.24).
RO2
RO3
RO4
RO5
RO6-8
DIO1-8
RO control word.
Displays the number of times relay output RO1 has
changed states.
State change count.
Configuration of the digital inputs/outputs (DIO) for use as
digital inputs,
Displays the delayed status of digital input/outputs DIO2
and DIO1. This word is updated only after
activation/deactivation delays (if any are specified).
Example: 0010 = DIO2 is on, DIO1 is off.
This parameter is read-only.
Status of digital input/outputs.
Parameters
Default
FbEq 16
0.0 -
t t
On Off
10 = 1 -
0.0 -
delay.
10 = 1 -
0000h
word. In the source
1 = 1
-
1 = 1
-
1 = 1
135
1
0
1
0
Time