ACS380 FW.book Page 32 Friday, May 4, 2018 4:18 PM
32 Control macros
ABB standard macro
ABB standard macro is suitable for an IO-controlled drive. Digital inputs control
start/stop (2-wire), direction and constant speed selection (3 speeds) and
acceleration and deceleration ramp selection.
You can activate the macro from the Control macros view, or by setting parameter
96.04 Macro select
to value ABB standard.
This is the default macro for the standard drive variant (ACS380-04xS) and
configured drive variant ACS380-4xC +L538.
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de