Standard Ai - ABB ACS380 Firmware Manual

ACS380 FW.book Page 141 Friday, May 4, 2018 4:18 PM
No. Name/Value
0 ... 16000 Hz
11.62 Freq out 2 actual value
0 ... 16000 Hz
11.63 Freq out 2 source
11.66 Freq out 2 source min
-32768.000 ...
32767.000
11.67 Freq out 2 source max
-32768.000 ...
32767.000
11.68 Freq out 2 at src min
0 ... 16000 Hz
11.69 Freq out 2 at src max
0 ... 16000 Hz
12

12 Standard AI

12.02 AI force selection
Bit
0
1
2...15
0000h...FFFFh
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Maximum value of frequency output 1.
Displays the value of frequency output 2 after scaling. See
parameter 11.66 Freq out 2 source
This parameter is read-only.
Unscaled value of frequency input 2.
Selects a drive signal to be connected to the frequency
output 2.
For the available selections, see parameter
1 source.
Defines the minimum value for frequency output 2.
Real signal value corresponding to minimum value of
frequency output 2.
Defines the minimum value for frequency output 2.
Real signal value corresponding to maximum value of
frequency output 2.
Defines the real value that corresponds to the minimum
frequency output 2 value defined by parameter Freq out 2
min.
Minimum value of frequency output 2.
Defines the real value that corresponds to the maximum
frequency output 2 value defined by parameter Freq out 2
max.
Maximum value of frequency output 2.
Configuration of standard analog inputs.
The true readings of the analog inputs can be overridden
for e.g. testing purposes. A forced value parameter is
provided for each analog input, and its value is applied
whenever the corresponding bit in this parameter is 1.
Note: AI filter times (parameters
12.26 AI1 filter time) have no effect on forced AI values
(parameters 12.13 AI1 forced value
value).
Note: Boot and power cycle reset the force selections
(parameter 12.02).
Value
1 = Force AI1 to value of parameter 12.13 AI1 forced
1 = Force AI2 to value of parameter 12.23 AI2 forced
Reserved
Forced values selector for analog inputs AI1 and AI2.
Parameters
Default
FbEq 16
1 = 1 Hz
-
min.
1 = 1 Hz
Not selected
11.55 Freq out
0.000
1 = 1
1500.000
1 = 1
0 Hz
1 = 1 Hz
16000 Hz
1 = 1 Hz
0000h
12.16 AI1 filter time and
and 12.23 AI2 forced
value.
value.
1 = 1
141