ACS380 FW.book Page 41 Friday, May 4, 2018 4:18 PM
Control macros
41
Motor potentiometer macro
This macro provides a way to adjust the speed with the help of two push buttons, or a
cost-effective interface for PLCs that vary the speed of the motor using only digital
signals.
You can activate the macro from the Control macros view, or by setting parameter
96.04 Macro select
to value Motor potentiometer.
For more information on the motor potentiometer counter, see section
Motor
potentiometer
on page 108.
The macro is optimized for the standard drive variant (ACS380-04xS) and configured
drive variant ACS380-04xC +L538.
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de