User Lock - ABB ACS380 Firmware Manual

ACS380 FW.book Page 109 Friday, May 4, 2018 4:18 PM


User lock

For better cybersecurity, you can set a master password to prevent eg. the changing
of parameter values and/or the loading of firmware and other files.
WARNING! ABB will not be liable for damages or losses caused by the failure
to activate the user lock using a new pass code. See
(page 15).
To activate the user lock for the first time, enter the default pass code, 10000000, into
96.02 Pass code. This will make parameters
new pass code into
Confirm user pass
want to prevent.
To close the user lock, enter an invalid pass code into
96.08 Control board
96.100...96.102
To reopen the lock, enter your pass code into
parameters 96.100...96.102
Settings
Parameters 96.02 Pass code
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
96.100...96.102
96.100 Change user pass
code. In 96.102 User lock functionality, define the actions that you
boot, or cycle the power. With the lock closed, parameters
are hidden.
visible.
(page 331) and 96.100...96.102.
Program features
Cybersecurity disclaimer
visible. Then enter a
code, and confirm the code in
96.02 Pass code, activate
96.02 Pass code. This will again make
109
96.101