Home View And Message View - ABB ACS380 Firmware Manual

ACS380 FW.book Page 18 Friday, May 4, 2018 4:18 PM
18 Control panel

Home view and Message view

The Home view is the main view. Open the Main menu and Options menu from the
Home view.
Home view
The Message view shows fault and warning messages. If there is an active fault or
warning, the panel shows the Message view directly.
You can open the Message view from the Options menu or Diagnostics submenu.
Message view: Fault
Message view: Warning
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
1. Control selection - local or remote
2. Local start/stop control - enabled
3. Rotation direction - forward or reverse
4. Local reference setting - enabled
5. Speed - target
6. Speed - current
7. Main menu - menu list
8. Options menu - quick access menu
Fault messages require your immediate attention.
Check the code in the Fault messages table on page
troubleshoot the problem.
Warning messages show possible problems.
Check the code in the Warning messages table on
page 392 to troubleshoot the problem.
402 to