Contents - ABB ACS380 Firmware Manual

ACS380 FW.book Page 31 Friday, May 4, 2018 4:18 PM
Control macros

Contents

•

ABB standard macro
• ABB limited macro
• Fieldbus control macro
• Alternate macro
• Motor potentiometer macro
• PID control macro
• Modbus macro
• Parameter default values for different macros
Control macros are sets of default parameter values that apply to a specific control
configuration. They make it faster and easier to set up a drive for use.
By default, macro for I/O controlled drive is set as ABB standard macro and macro for
Fieldbus controlled drive is set as Fieldbus control macro.
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Control macros 31
4