Programmable Relay Outputs - ABB ACS380 Firmware Manual

ACS380 FW.book Page 65 Friday, May 4, 2018 4:18 PM


Programmable relay outputs

There is one relay output as standard. The signal indicated by the output can be
selected by parameters.
Settings
Parameter groups

Programmable I/O extensions
Inputs and outputs can be added by using I/O extension modules.
The table below shows the number of I/O on the control unit as well as optional I/O
extension modules.
Location
Base unit
BREL
BIO-01
Note: The configuration parameter group contains parameters that display the values
of the inputs on the extension module. These parameters are the only way of utilizing
the inputs on an I/O extension module as signal sources.
Settings
Parameter groups

Fieldbus control
The drive can be connected to several different automation systems through its
fieldbus interfaces. See chapters
interface (EFB)
Settings
Parameter groups
299), 52 FBA A data in
fieldbus (page 301).
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
10 Standard DI, RO (page 131).
Digital Digital Digital
inputs outputs I/Os
(DI) (DO) (DIO)
2 - -
- - -
3 1 -
15 I/O extension module (page 149).
Fieldbus control through the embedded fieldbus
and Fieldbus control through a fieldbus
50 Fieldbus adapter (FBA)
(page 300), 53 FBA A data out
Program features
Analog Analog Relay
inputs outputs outputs
(AI) (AO)
- -
- -
1 -
adapter.
(page 295), 51 FBA A settings
(page 301) and 58 Embedded
65
(RO)
1
4
-
(page