Control And Status Words - ABB ACS380 Firmware Manual

ACS380 FW.book Page 123 Friday, May 4, 2018 4:18 PM
No. Name/Value
06
06 Control and status
words
06.01 Main control word
0000h...FFFFh
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Drive control and status words.
The main control word of the drive. This parameter shows
the control signals as received from the selected sources
(such as digital inputs, the fieldbus interfaces and the
application program).
The bit assignments of the word are as described on page
487. The related status word and state diagram are
presented on pages 488 and 489 respectively.
This parameter is read-only.
Note: With the fieldbus control, the parameter value is not
same as the value that it receives from the PLC. For the
correct value, see parameter 50.12 FBA A debug
Bit Name
0 Off1 control
1 Off2 control
2 Off3 control
3 Run
4 Ramp out zero
5 Ramp hold
6 Ramp in zero
7 Reset
8 Inching 1
9 Inching 2
10 Remote cmd
11 Ext ctrl loc
12 User bit 0
13 User bit 1
14 User bit 2
15 User bit 3
Main control word.
Parameters 123
Default
FbEq 16
0000h
mode.
1 = 1