Cybersecurity Disclaimer - ABB ACS380 Firmware Manual

ACS380 FW.book Page 15 Friday, May 4, 2018 4:18 PM
RCD
Rectifier
RFI
RO
SDO
SIL
STO
Related manuals
The related manuals are listed behind the front cover under

Cybersecurity disclaimer

This product is designed to be connected to and to communicate information and
data via a network interface. It is Customer's sole responsibility to provide and
continuously ensure a secure connection between the product and Customer network
or any other network (as the case may be). Customer shall establish and maintain
any appropriate measures (such as but not limited to the installation of firewalls,
application of authentication measures, encryption of data, installation of anti-virus
programs, etc) to protect the product, the network, its system and the interface
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for
damages and/or losses related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
See also section
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Residual current device
Converts alternating current and voltage to direct current and
voltage.
Radio frequency interference
Relay output; interface for a digital output signal. Implemented
with a relay.
Service data object
Safety integrity level. See chapter Safe torque off function in the
drive hardware manual.
Safe torque off. See chapter Safe torque off function in the drive
hardware manual.
User lock (page 109).
Introduction to the manual
List of related manuals.
15