Input References - ABB ACS380 Firmware Manual

ACS380 FW.book Page 118 Friday, May 4, 2018 4:18 PM
118 Parameters
No. Name/Value
01.57 Inverter kWh counter
(resettable)
0...1000 kWh
01.58 Cumulative inverter
energy (resettable)
-200000000.0...
200000000.0 kWh
01.61 Abs motor speed used
0.00... 30000.00 rpm
01.62 Abs motor speed %
0.00... 1000.00%
01.63 Abs output frequency
0.00...500.00 Hz
01.64 Abs motor torque
0.0...1600.0%
01.65 Abs output power
0.00...32767.00 kW
01.66 Abs output power %
mot nom
0.00... 300.00%
01.67 Abs output power %
drive nom
0.00... 300.00%
01.68 Abs motor shaft power
0.00...332767.00 kW
03

03 Input references

03.01 Panel reference
-100000.00...
100000.00 rpm, Hz or
%
03.02 Panel reference
remote
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Amount of energy that has passed through the drive (in
either direction) in full kilowatt-hours. Whenever the
counter rolls over, 01.56 Inverter MWh counter
(resettable) is incremented. The minimum value is zero.
You can reset the value by setting it to zero. Resetting any
of parameters 01.55...01.58 resets all of them.
Energy in kWh.
Amount of energy that has passed through the drive (in
either direction) in full kilowatt-hours. The minimum value
is zero.
You can reset the value by setting it to zero. Resetting any
of parameters 01.55...01.58 resets all of them.
Energy in kWh.
Absolute value of the motor speed used
speed used.
Absolute value of the motor speed %
%
Absolute value of the output frequency
frequency
Absolute value of the motor torque 01.10 Motor
Absolute value of the output power 01.14 Output
Absolute value of the output power % of motor nominal
01.15 Output power % of motor nom.
Absolute value of the output power % of drive nominal
01.16 Output power % of drive nom.
Absolute value of the motor shaft power
power.
Values of references received from various sources.
All parameters in this group are read-only unless
otherwise noted.
Local mode reference is given from the control panel.
Control panel or PC tool reference.
Remote mode reference given from the control panel.
Default
FbEq 16
-
10 = 1 kWh
-
10 = 1 kWh
01.01 Motor -
1 = 1 rpm
01.03 Motor speed -
10 = 1%
01.06 Output -
1 = 1 Hz
torque. -
1 = 1%
power. -
1 = 1 kW
-
1 = 1%
-
1= 1%
01.17 Motor shaft -
1 = 1 kW
0
1 = 10 unit
-