Tips - ABB ACS380 Firmware Manual

ACS380 FW.book Page 96 Friday, May 4, 2018 4:18 PM
96 Program features


Tips

• You can connect Slow down and Stop signals into the same signal source by
setting the Stop limit and Slow down parameters to the same digital input
Forward stop limit = DI2 and
• You can change the Limit to limit state machine state with the parameter Limit to
limit state parameter (76.01), in case of maintenance.
Settings
Parameter groups
190) and 28 Frequency reference chain
Paramters 76.01 Limit to limit control status
control (page 322),
limit (page 323), 76.05 Forward slow down limit
(page 325), 76.07 Reverse slow down limit
(page 325) and 76.09 Slow down frequency
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
76.05 Forward slow down limit = DI2).
21 Start/stop mode (page 169),
(page 203).
(page 322),
76.03 Limit to limit trigger type
(page 325),
(page 325).
23 Speed reference ramp
76.02 Enable limit to limit
(page 323), 76.04 Forward stop
(page 324), 76.06 Reverse stop limit
76.08 Slow down speed
(76.01
(page