At+Cmgl List Sms Messages From Preferred Store - SimCom SIM5350 Command Set

SIM5350 AT Command Set
AT+CNMI?
+CNMI: 0,0,0,0,0
OK
AT+CNMI=?
+CNMI: (0,1,2,3),(0,1,2,3),(0,2,3),(0,1),(0,1)
OK
AT+CNMI=2,1 (unsolicited result codes after received messages.)
OK
7.10

AT+CMGL List SMS messages from preferred store

Description
This command is used to return messages with status value
to the TE.
If the status of the message is 'received unread', the status in the storage changes to 'received read'.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Test Command
AT+CMGL=?
Write Command
AT+CMGL=<stat>
SIM5350_ATC_V1.02
Responses
+CMGL: (list of supported <stat>s)
OK
Responses
If text mode (AT+CMGF=1), command successful and SMS-S
UBMITs and/or SMS-DELIVERs:
+CMGL:<index>,<stat>,<oa>/<da>,[<alpha>],[<scts>][,<tooa>/<t
oda>,<length>] <CR><LF><data>[<CR><LF>
+CMGL:<index>,<stat>,<da>/<oa>,[<alpha>],[<scts>][,<tooa>/<t
oda>,<length>]<CR><LF><data>[...]]
OK
If text mode (AT+CMGF=1), command successful and SMS-
STATUS-REPORTs:
+CMGL:<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<s
t>[<CR><LF>
+CMGL:<index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<s
t>[...]]
OK
If text mode (AT+CMGF=1), command successful and SMS-
COMMANDs:
+CMGL: <index>,<stat>,<fo>,<ct>[<CR><LF>
94
<stat> from message storage <mem1>
6/9/2014