At Commands For Sms; Cms Error Message Service Failure Result Code - SimCom SIM5350 Command Set

SIM5350 AT Command Set
integer type: the cell's arfcn to be locked
Valid arfcn value
GSM:
band900：0～124，975～1023
band1800：512～885
band1900：512～810
band850：128～251
7

AT Commands for SMS

7.1

+CMS ERROR Message service failure result code

Description
Final result code +CMS ERROR:
The operation is similar to ERROR result code. None of the following commands in the same
command line is executed. Neither ERROR nor OK result code shall be returned. ERROR is
returned normally when error is related to syntax or invalid parameters. The format of
either numeric or verbose. This is set with command AT+CMEE.
SIM PIN References
NO 3GPP TS 27.005
Syntax
+CMS ERROR: <err>
Defined values
<err>
300 ME failure
301 SMS service of ME reserved
302 Operation not allowed
303 Operation not supported
304 Invalid PDU mode parameter
305 Invalid text mode parameter
310 SIM not inserted
311 SIM PIN required
312 PH-SIM PIN required
313 SIM failure
314 SIM busy
315 SIM wrong
SIM5350_ATC_V1.02
<err> indicates an error related to mobile equipment or network.
83
<err> can be
6/9/2014