At+Ecsq Received Signal Level Indication - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Defined values
<flag>
Integer.
Bit 0 Any value(0~4294967295) that bit 0 is 1 e.g. 1,3,5..
Bit 1 Any value(0~4294967295) that bit 1 is 1 e.g. 2,3,6..
Bit 2 Any value(0~4294967295) that bit 2 is 1 e.g. 4,5,..
Bit 3 Any value(0~4294967295) that bit 3 is 1 e.g. 8,9..
Bit 7 Any value(0~4294967295) that bit 7 is 1 e.g. 128,129,130..
<ind>
Integer.
1 SMS_READY
2 PHB_READY
4 file change for PLMN files
8 file change for EONS files
16 Invalid SIM
128 AT_READY
6.23

AT+ECSQ received signal level indication

Description
Set command to enable +ECSQ unsolicited result code +ECSQ:
<rssi>,<ber>,<raw_rssi_in_qdbm>[,<RSCP_in_qdbm>,<EcN0_in_qdbm>], which is to indicate the
received signal level.
Active command is to query the current received signal level.
Read command returns the current setting of +ECSQ unsolicited result code.
SIM PIN References
YES Vender
Syntax
Test Command
AT+ECSQ =?
Execute Command
AT+ECSQ
Read Command
AT+ECSQ?
Write Command
AT+ECSQ=<flag>
SIM5350_ATC_V1.02
Responses
+ECSQ: (0,1)
Responses
+ECSQ: <rssi>, <ber>,<raw_rssi_in_qdbm>[,<RSCP_in_qdbm>,
<EcN0_in_qdbm>]
Responses
+ECSQ: <flag>
Responses
OK
ERROR
78
6/9/2014