At+Cgsetv Set The Value Of Specified Gpio - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Write Command
AT+CGDRT=<gpio_num>,
<gpio_io>[,<save>]
Defined values
<gpio_num>
2,3,4,5,6,7,9,10,11,12,15,16,17,18,19,20,21,22,23,29,30,31,35,36,37,38,39,40,46,47,48,49,53
<gpio_io>
0 – in
1 – out
<save>
0 – not save the setting
1 – save the setting
NOTE: If the parameter of
The gpio_num corresponds to pin index on SIM5350;
Examples
AT+CGDRT=47,0,0
OK
9.5

AT+CGSETV Set the value of specified GPIO

Description
This command is used to set the value of the specified GPIO to high or low.
SIM PIN References
NO Vendor
Syntax
Write Command
AT+CGSETV=<gpio_num>,
<gpio_hl>[,<save>]
Defined values
<gpio_num>
2,3,4,5,6,7,9,10,11,12,15,16,17,18,19,20,21,22,23,29,30,31,35,36,37,38,39,40,46,47,48,49,53
<gpio_hl>
0 – low
1 – high
SIM5350_ATC_V1.02
Responses
OK
ERROR
<save> is omitted, it will save the direction of specified GPIO;
Responses
OK
ERROR
132
6/9/2014