At+Clip Calling Line Identification Presentation - SimCom SIM5350 Command Set

SIM5350 AT Command Set
<dtmf-string>
A sequence of ASCII character in the set 0-9, *, #, A, B, C, D, and maximal length of the string is
29. The string must be enclosed in double quotes (""), and separated by commas between the ASCII
characters (e.g. "1,3,5,7,9,*"). Each of the tones with a duration which is set by the
command.
Examples
AT+VTS=1
OK
AT+VTS=1,20
OK
AT+VTS="1,3,5"
OK
AT+VTS=?
+VTS: (0-9,*,#,A,B,C,D)
OK
4.9

AT+CLIP Calling line identification presentation

Description
This command refers to the GSM/UMTS supplementary service CLIP (Calling Line Identification
Presentation) that enables a called subscriber to get the calling line identity (CLI) of the calling
party when receiving a mobile terminated call.
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the
execution of the supplementary service CLIP in the network.
When the presentation of the CLI at the TE is enabled (and calling subscriber allows), +CLIP:
<number>,<type>,,[,[<alpha>][,<CLI
+CRING: <type>; refer sub clause "Cellular result codes +CRC") result code sent from TA to TE. It
is manufacturer specific if this response is used when normal voice call is answered.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CLIP=?
Read Command
AT+CLIP?
SIM5350_ATC_V1.02
validity>]] response is returned after every RING (or
Responses
+CLIP: (list of supported <n>s)
OK
Responses
+CLIP: <n>,<m>
OK
37
AT+VTD
6/9/2014