SimCom SIM5350 Command Set page 114

SIM5350 AT Command Set
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGQMIN=?
Read Command
AT+CGQMIN?
Write Command
AT+CGQMIN=
<cid>[,<precedence>
[,<delay>[,<reliability>
[,<peak> [,<mean>]]]]]
Defined values
<cid>
A numeric parameter which specifies a particular PDP context definition (see
command).
1...16
<PDP_type>
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
PPP Point to Point Protocol
IPV6 Internet Protocol Version 6
<precedence>
A numeric parameter which specifies the precedence class:
0 – network subscribed value
SIM5350_ATC_V1.02
Responses
+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list
of supported <delay>s), (list of supported <reliability>s) , (list of
supported <peak>s), (list of supported <mean>s) [<CR><LF>
+CGQMIN: <PDP_type>, (list of supported <precedence>s), (list
of supported <delay>s), (list of supported <reliability>s) , (list of
supported <peak>s), (list of supported <mean>s)[...]]
OK
ERROR
Responses
+CGQMIN: [<cid>, <precedence
<peak>, <mean>[<CR><LF>
+CGQMIN: <cid>, <precedence
<mean>
[...]]]
OK
ERROR
Responses
OK
ERROR
113
>, <delay>, <reliability>,
>, <delay>, <reliability.>, <peak>,
AT+CGDCONT
6/9/2014