At+Cpwmclks Select The Source Clock For The Pwm - SimCom SIM5350 Command Set

SIM5350 AT Command Set
This command is used to configure the output frequency and duty for the PWM pin, the
default frequency and duty is zero.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CPWM=?
Read Command
AT+CPWM?
Write Command
AT+CPWM=<freq>,<duty>
Defined values
< freq >
output frequency of the PWM pin, 200Hz is recommended and also confirmed
< duty >
0 - 100 duty cycle
Examples
AT+CPWM?
+CPWM: 200,20
OK
AT+CPWM=200,40
OK
9.3

AT+CPWMCLKS Select the source clock for the PWM

Description
This command is used to select a clock as the source clock for the PWM pin, the default
value is 3
SIM PIN References
NO Vendor
SIM5350_ATC_V1.02
Responses
OK
Responses
+CPWM: <freq>,<duty>
OK
ERROR
Responses
OK
ERROR
130
6/9/2014