SIM5350 AT Command Set
Test Command
AT+CPMS=?
Read Command
AT+CPMS?
Write Command
AT+CPMS=<mem1>
[,<mem2>[,<mem3>]]
Defined values
<mem1>
String type, memory from which messages are read and deleted (commands List Messages
AT+CMGL, Read Message
"SM"
SIM message storage
"ME"
Device message storage
"SM_P" SM prefer, try SM first, then ME
"ME_P" ME prefer, try ME first, then SM
"MT"
Any of storages associated with ME (SM first)
<mem2>
String type, memory to which writing and sending operations are made (commands Send Message
from Storage
AT+CMSS
"SM"
SIM message storage
"ME"
Device message storage
"SM_P" SM prefer, try SM first, then ME
"ME_P" ME prefer, try ME first, then SM
"MT"
Any of storages associated with ME (SM first)
<mem3>
String type, memory to which received SMS is preferred to be stored (unless forwarded directly to
TE; refer command New Message Indications AT+CNMI).
"SM"
SIM message storage
"ME"
Device message storage
"SM_P" SM prefer, try SM first, then ME
"ME_P" ME prefer, try ME first, then SM
SIM5350_ATC_V1.02
Responses
+CPMS: (list of supported <mem1>s), (list of supported
<mem2>s), (list of supported <mem3>s)
OK
Responses
+CPMS:<mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3>
OK
ERROR
+CMS ERROR:
<err>
Responses
+CPMS:
<used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
ERROR
<err>
+CMS ERROR:
AT+CMGR
and Delete Message AT+CMGD).
and Write Message to Memory AT+CMGW).
86
6/9/2014
Need help?
Do you have a question about the SIM5350 and is the answer not in the manual?