At+Ccodecs Codec Chips Select - SimCom SIM5350 Command Set

SIM5350 AT Command Set
9.15

AT+CCODECS Codec chips select

Description
This command is used to select codec chip. SIM5350 supports WM8974 codec and WM8960
codec. The selected codec chip will be initialized after boot up automatically. If one wants to make
a call use codec must ensure that the AT+CPCM=1.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CCODECS=?
Read Command
AT+ CCODECS?
Write Command
AT+CCODECS=<chip>
Defined values
<chip>
0 no codec
1 WM8974 codec
2 WM8960 codec
Examples
AT+CCODECS=?
+CCODECS: (0-2)
OK
AT+CCODECS = 1
+CCODECS: 1
OK
SIM5350_ATC_V1.02
Responses
+CCODECS: (0-2)
OK
Responses
+CCODECS: <chip>
OK
Responses
+CCODECS: <chip>
OK
ERROR
141
6/9/2014