Information Responses - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Test Command
Read Command
Write Command
Execution Command
NOTE: The character "+" between the prefix "AT" and command name may be replaced by other
character. For example, using "#" or "$"instead of "+".
2.3

Information responses

If the commands included in the command line are supported by the Module and the subparameters are
correct if presented, some information responses will be retrieved by from the Module. Otherwise, the
Module will report "ERROR" or "+CME ERROR" or "+CMS ERROR" to Customer Application.
Information responses start and end with <CR><LF>, i.e. the format of information responses is
"<CR><LF><response><CR><LF>". Inside information responses, there may be one or more <CR><LF>.
Throughout this document, only the responses are presented, and <CR><LF> are intentionally omitted.
SIM5350_ATC_V1.02
AT+<NAME>=? Test the existence of the command; give some
information about the command subparameters.
AT+<NAME>? Check the current values of subparameters.
AT+<NAME>=<...> Set user-definable subparameter values.
AT+<NAME> Read non-variable subparameters determined by
internal processes.
11
6/9/2014