Ats4 Set Response Formatting Charactor; Ats5 Set Command Line Editing Charcater - SimCom SIM5350 Command Set

SIM5350 AT Command Set
<value>
13 Carriage return character (CR, IA5 0/13).
0 to 127 Set command line termination character to this value.
Examples
ATS3=13
OK
3.11

ATS4 Set Response Formatting Charactor

Description
Response formatting character This S-parameter represents the decimal IA5 value of the character
generated by the DCE as part of the header, trailer, and terminator for result codes and information
text, along with the S3 parameter (see the description of the V parameter for usage).
SIM PIN References
YES V.25ter
Syntax
Write Command
ATS4=<value>
Defined values
<value>
10 Line feed character (LF, IA5 0/10).
0 to 127 Set response formatting character to this value.
Examples
ATS4=10
OK
3.12

ATS5 Set Command Line Editing Charcater

Description
Command line editing character.
This S-parameter represents the decimal IA5 value of the character recognized by the DCE as a
request to delete from the command line the immediately preceding character.
SIM PIN References
SIM5350_ATC_V1.02
Responses
OK
ERROR
19
6/9/2014