At+Cgact Pdp Context Activate Or Deactivate - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Defined values
<state>
Indicates the state of Packet Domain attachment:
0 – detached
1 – attached
Examples
AT+CGATT?
+CGATT: 0
OK
AT+CGATT=1
OK
8.5

AT+CGACT PDP context activate or deactivate

Description
The write command is used to activate or deactivate the specified PDP context (s).
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGACT=?
Read Command
AT+CGACT?
Write Command
AT+CGACT=<state>
[,<cid>]
Defined values
SIM5350_ATC_V1.02
+CME ERROR: <err>
Responses
+CGACT: (list of supported <state>s)
OK
Responses
+CGACT: [<cid>, <state>[<CR><LF>
+CGACT: <cid>, <state>
[...]]]
OK
Responses
OK
ERROR
+CME ERROR: <err>
116
6/9/2014