At+Cgatt Packet Domain Attach Or Detach - SimCom SIM5350 Command Set

SIM5350 AT Command Set
10 – 100000 (~0.22 kbit/s)
11 – 200000 (~0.44 kbit/s)
12 – 500000 (~1.11 kbit/s)
13 – 1000000 (~2.2 kbit/s)
14 – 2000000 (~4.4 kbit/s)
15 – 5000000 (~11.1 kbit/s)
16 – 10000000 (~22 kbit/s)
17 – 20000000 (~44 kbit/s)
18 – 50000000 (~111 kbit/s)
31 – optimization
Examples
AT+CGQMIN?
+CGQMIN:
OK
AT+CGQMIN=?
+CGQMIN: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQMIN: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQMIN: "IPV6",(0-3),(0-4),(0-5),(0-9),(0-18,31)
OK
8.4

AT+CGATT Packet domain attach or detach

Description
The write command is used to attach the MT to, or detach the MT from, the Packet Domain service.
The read command returns the current Packet Domain service state.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CGATT=?
Read Command
AT+CGATT?
Write Command
AT+CGATT=<state>
SIM5350_ATC_V1.02
Responses
+CGATT: (list of supported <state>s)
OK
Responses
+CGATT: <state>
OK
Responses
OK
ERROR
115
6/9/2014