At+Epbse Band Selection - SimCom SIM5350 Command Set

SIM5350 AT Command Set
5.8

AT+EPBSE Band Selection

Description
To set MS preferred band.
SIM PIN References
YES Vender
Syntax
Test Command
AT+EEBSE=?
Read Command
AT+EEBSE?
Write Command
AT+EEBSE=<gsm_band>,<
umts_band>
Defined values
<gsm_band>
bit 1 EGSM900
bit 3 DCS1800
bit 4 PCS1900
bit 7 GSM850
0xff Auto selection ->select All supported bands
<umts_band>
bit 0 UMTS BAND I : WCDMA-IMT-2000
bit 1 UMTS BAND II : WCDMA-PCS-1900
bit 2 UMTS BAND III : WCDMA-DCS-1800
bit 3 UMTS BAND IV : WCDMA-AWS-1700
bit 4 UMTS BAND V : WCDMA-CLR-850
bit 5 UMTS BAND VI : WCDMA-800
bit 6 UMTS BAND VII : WCDMA-IMT-E-2600
bit 7 UMTS BAND VIII : WCDMA-GSM-900
bit 8 UMTS BAND IX : WCDMA-1800
bit 9 UMTS BAND X : WCDMA-1700
0xffff Auto selection-> s elect All supported bands
Examples
AT+EPBSE=255,65535
SIM5350_ATC_V1.02
Responses
List of supported bit masks of each band mode
+EPBSE: <gsm_band>, <umts_band>
Responses
+EPBSE: <gsm_band>, <umts_band>
Responses
OK
ERROR
56
6/9/2014