At+Eops Enhanced Operator Selection - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Execute Command
AT+ESCRI
Write Command
AT+ESCRI=<force_send>
Defined values
<force_send>
integer
0 RRCE send SCRI depend on NW support FD or not
1 force RRCE send SCRI
6.25

AT+EOPS Enhanced Operator Selection

Description
This command is similar to +COPS, with additional support for specified ARFCN. Set command
forces an attempt to select and register the GSM/UMTS network operator. If the selected operator is
not available, ERROR is returned. Read command returns the current mode, the currently selected
operator. Test command returns operator list present in the network.
SIM PIN References
YES Vender
Syntax
Test Command
AT+EOPS=?
Read Command
AT+EOPS?
Write Command
AT+EOPS=<mode>[,<forma
t>,<oper>[,<Act>,<arfcn>]]
Defined values
SIM5350_ATC_V1.02
Responses
Same as AT+ESCRI=1
Responses
OK
+CMS ERROR:
Responses
+COPS: [list of supported (<stat>,long alphanumeric <oper>,short
alphanumeric<oper>,numeric<oper>,[,<Act>])s][,,(list of
supported<mode>s),(list of supported <format>s)]
+CME ERROR: <err>
Responses
+COPS:<mode>[,<format>,<oper>]
+CME ERROR: <err>
Responses
OK
+CME ERROR: <err>
80
6/9/2014