At+Cacm Accumulated Call Meter - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Defined values
<command>
Command passed on by the MT to the SIM:
176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
<fileID>
Integer type; this is the identifier of a elementary data file on SIM.
<p1> <p2> <p3>
Integer type; parameters to be passed on by the Module to the SIM.
<data>
Information which shall be written to the SIM (hexadecimal character format, refer AT+CSCS).
<sw1> <sw2>
Status information from the SIM about the execution of the actual command. It is returned in both
cases, on successful or failed execution of the command.
<response>
Response data in case of a successful completion of the previously issued command.
character format)
Examples
AT+CRSM=?
OK
6.8

AT+CACM Accumulated call meter

Description
This command is used to reset the Advice of Charge related accumulated call meter value in SIM
file EF .
ACM
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CACM=?
Read Command
AT+CACM?
SIM5350_ATC_V1.02
Responses
OK
Responses
+CACM: <acm>
65
(hexadecimal
6/9/2014