At+Cgdrt Set The Direction Of Specified Gpio - SimCom SIM5350 Command Set

SIM5350 AT Command Set
Syntax
Test Command
AT+CPWMCLKS=?
Read Command
AT+CPWMCLKS?
Write Command
AT+CPWMCLKS=<src>
Defined values
< src >
0 - 4K
1 - 8K
2 - 16K
3 - 32K
4 - 10M
5 - 20M
6 - 40M
7 - 80M
Examples
AT+CPWMCLKS?
+CPWMCLKS: 6
OK
AT+CPWMCLKS=4
OK
9.4

AT+CGDRT Set the direction of specified GPIO

Description
This command is used to set the specified GPIO to input or output state. If setting to input state,
then this GPIO can not be set to high or low value.
SIM PIN References
NO Vendor
Syntax
SIM5350_ATC_V1.02
Responses
OK
Responses
+CPWMCLKS: <src>
OK
ERROR
Responses
OK
ERROR
131
6/9/2014