At+Ecelck Cell Lock - SimCom SIM5350 Command Set

SIM5350 AT Command Set
6.26

AT+ECELCK Cell Lock

Description
This command is used to set or cancel cell lock, and get the currently locked cell if any.
SIM PIN References
YES Vender
Syntax
Test Command
AT+ECELCK=?
Read Command
AT+ECELCK?
Write Command
AT+ECELCK=<mode>,[<en
abled_bitmap>,]<band_indic
ator>,<arfcn>,[<arfcn>,...]
Defined values
<mode>
integer type
0: cancel cell lock (for the only <arfcn>)
1: set cell lock (for the only <arfcn>)
2: get extended cell lock, this will get the current locked cells' arfcn.
3: set extended cell lock, this will set lock for a group of cells by different arfcn (maximum 3).
Only in this mode, more than one <arfcn> can be entered in the following parameter.
4: cancel extended cell lock, this will cancel all cell lock.
<enabled_bitmap>
integer type 0~7
Bits set to 1 indicate which <arfcn> to be locked.
Ex. 00000101 => the 1st and 3rd <arfcn> is valid.
<band_indicator>
integer type
0: not 1900 band cell
1: 1900 band cell
<arfcn>
SIM5350_ATC_V1.02
Responses
+ ECELCK: (0-1)
Responses
+ECELCK:
<enabled_bitmap>,<band_indicator>,<arfcn>,[<arfcn>,...]
OK
Responses
OK
ERROR
82
6/9/2014