At+Cldov Configure The Ldo's Output Voltage; At+Cpwm Configure The Frequency And Duty For The Pwm - SimCom SIM5350 Command Set

SIM5350 AT Command Set
9.1

AT+CLDOV Configure the LDO's output voltage

Description
This command is used to set the output voltage for the specific LDO: VDD_SD, the default
output voltage is 3.0V.
SIM PIN References
NO Vendor
Syntax
Test Command
AT+CLDOV=?
Read Command
AT+CLDOV?
Write Command
AT+CLDOV=<val>
Defined values
< val >
5 - 2.8V
6 - 3.0V
7 - 3.1V
8 - 3.3V
Examples
AT+CLDOV?
+CLDOV: 6
OK
AT+CLDOV=7
OK
9.2

AT+CPWM Configure the frequency and duty for the PWM

Description
SIM5350_ATC_V1.02
Responses
OK
Responses
+CLDOV: <val>
OK
ERROR
Responses
OK
ERROR
129
6/9/2014